Insulation Piercing Waterproof Connector EBB AlCu 10-150/1,50-70mm2

Insulation Piercing Waterproof Connector EBB AlCu 10-150/1,50-70mm2 is used to achieve contact by simultaneously piercing the insulation of LV ABC conductors of the main power distribution line and of network connection insulated conductor with simultaneous installation and connection of surge arrester with both the main and tap-off line.
It is allowed to use the connector only with a surge arrester. It is not allowed to use the connector without a surge arrester.
Insulation Piercing Waterproof Connector EBB AlCu 10-150/1,50-70mm2 is manufactured in such a way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or a copper conductor. The elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electrical contact grease.
When tightening the shear-off nut insulation Piercing Waterproof Connector EBB AlCu 10-150/1,50-70mm2 the “teeth“ of contact plates penetrate through the insulation and make a perfect contact, thanks to deep penetration into the conductor and large contact surface with it.
The contact plates are made of electrolytic sheets of excellent conductivity and very high mechanical strength. Therefore, penetration through insulation is possible even on very low temperatures.
Tightening of Insulation Piercing Waterproof Connector EBB AlCu 10-150/1,50-70mm2 is done until mechanical damage of the shear-off nut occurs. Additional tightening is allowed up to the maximum mechanical load, a maximum of 1.5 circles from the moment of damage to the shear-off nut. Installation under voltage is possible but it is necessary to use adequate protective equipment.
Insulation Piercing Waterproof Connector is designed in such a way that it enables fast, easy, and reliable installation regardless of outdoor temperature. The housing of the connector is made of Polyamide PA 6.6 (30-50% glass fiber reinforced), resistant to UV rays, weather conditions, temperature changes, and aging.

Insulation Piercing Waterproof Connector:
– does not contain parts that could fall off during installation;
– can be used/installed only once;
– has an anti-rotation device (ARD), which enables easy and proper installation because it doesn’t allow rotation of the upper and lower part of the connector around its axis, which results in easy and deep penetration of contact plates through the insulation of LV ABC conductor during installation of the connector;

Related products

This is will be a quote about what the company offers, a slogan for example

PRODUCTS

Scan the code